Install of Corvette Turn Signal Mirrors
- Feb 19, 2007
- Series: Installation article
Note: Professional Installation Recommended
The following installation instructions are to be considered as a guide only.
Door removal procedures, indicator wire color and location may have changed since publication of these instructions.
The installer is responsible for any damage that may occur during installation.
Go to Installation:
What is involved with installing the Signal Mirror® kit?
The basic steps, for most kits, to installing Signal® mirrors are: remove the door panel, disconnect and remove the mirror housing, remove the factory glass from the mirror housing, install the Signal® mirror in the mirror housing, route the Signal Mirror® wire harness through the door frame, and splice the Signal Mirror® wire harness into the left and right turn signal wires. Take a look at our installation instructions for a specific vehicle here. Professional installation is recommended.
Is it absolutely necessary to have the Signal® mirror installed by a professional? Can I do it myself?
It is not absolutely necessary to have a professional install Signal® mirrors, only recommended. Most Signal Mirror® installations require removing the vehicle's door panels and plastic accessories. You can look at our installation instructions here to help you decide if you want to do the installation yourself. You can call us at 
1-800-844-6616 or download our Key Installer listing from here to help you find a recommended professional installer in your area. Most installations can be done in 1 to 2 hours by a professional and may take longer if you do the installation yourself.
I've decided that I do need a professional installer. Where can I go?
You can call us at 1-800-844-6616 or download our Key Installer listing from here to help you find a recommended professional installer in your area. It is in .PDF format and includes key installers for each state as well as specific contacts and phone numbers within each company.